The New Chemistry Class: Startups Rebuilding Energetics From the Molecule Up

Intel

11/02/2026

Anna Tombazzi

Startup Watch | Energetics

From Reactor to Plant: The Startups Taking On Energetics

For most of the last fifty years, almost nobody started an energetics company. The chemistry is unforgiving, permits take years, and demand rose and fell with each conflict. That has changed. Allied governments now treat energetics as critical chemicals, and a new class of startups is working every layer: the reactors, the precursors, the plants, the warheads, and how production gets deployed.

The Toolmakers: Changing How Nitration Happens

Chemtrix is not a defense startup, but it may matter as much as any of them. The Dutch company, which grew out of flow chemistry research at the University of Hull, builds silicon carbide Plantrix reactors for fast, highly exothermic reactions, nitration included, at up to 400 kg per hour per module. Continuous flow means far less material in process at any moment and much tighter heat control than large batch vats.

AT Process Technologies (ATP) of Waltham, Massachusetts, applies the same idea to full production with autonomous, skidded modules that run continuously and generate little to no waste.

Synthio Chemicals of Boulder, Colorado, runs a proprietary continuous flow platform for chemicals that are hard to make safely at scale, including propellant binding agents, stabilizers, high-nitrogen precursors, and energetic plasticizers and binders. It was among the companies selected for an SBA Critical Suppliers award in September 2026.

The Chemists: Rebuilding the Precursor Layer

Ohr calls itself an emerging chemical prime. Its "Creationary Chemistry" approach pairs selective synthesis with continuous flow to build energetics, propellants and binders from abundant feedstocks rather than refining them out of crude.

Athanor, led by founder Alexander Cortes with Purdue's Davin Piercey as chief science officer, is building domestic specialty nitrogen chemistry. It starts with creatine and aims to control upstream precursors like cyanamide and sarcosine.

ChemPilot, a Technion spin-out, uses quantum simulation, machine learning and AI agents to find new energetic and propellant materials that can actually be made. The company says this compresses a discovery process that normally takes ten years or more into months.

The Sovereign Builders: New Plants for Allied Supply

CellCore Technologies is building Canada's first Indigenous-owned nitrocellulose facility in Saskatchewan, planned at 6,000 MT a year, with groundbreaking targeted for Q4 2026 and first production in Q1 2029. It pairs prairie flax straw with dissolving wood pulp and says its first three years of output are pre-sold.

Verkan, the Wallenberg-owned Swedish venture, plans a propellant plant near Kristinehamn that would make its own nitrocellulose, nitroesters and ether, targeting a 2027 construction start and more than 1,000 tonnes a year from 2028.

Sterling Energetics is proposing Iron Willow, a campus in central Alberta developed with the Samson Cree Nation that would run from forestry feedstock through nitrocellulose and nitroglycerin to finished double-base propellant.

Swebal (Sweden Ballistics) broke ground on October 19, 2026 on Sweden's first TNT plant in roughly thirty years, in Nora, sized for up to 4,500 tonnes a year with deliveries planned for the second half of 2028.

The Distributed Model: Modular Production and Warheads

Critical Materials Group (CMG) of Austin, Texas, raised a $10.3M seed round led by Overmatch Ventures to bring its first modular, automated production system online in 2027. It already makes Composition-4 in Texas and in October acquired Rocky Mountain Scientific Laboratory.

Deterrence of Fremont, California, builds robots that make explosives, using computer vision and machine learning to automate production of explosives, propellants and primers. It raised a $10.1M seed round led by Riot Ventures.

Odin Energetics, a Solugen and Kraken Kinetics joint venture with $115 million committed, plans containerized HMX and RDX plants it says can be stood up in six months near bases and test ranges. Holston Army Ammunition Plant remains the sole US producer of both, and as of late October 2026 no Army or Pentagon supply contract with Odin had been announced.

Warheads are where the drone boom meets energetics. The winners of the Pentagon's spring 2026 Drone Dominance Lethality Prize Challenge, Bravo Ordnance, Kela, Kraken Kinetics, Mountain Horse Solutions and Northrop Grumman, became preferred payload providers for Gauntlet drone makers, and most of them are startups. Kraken's Terminus warhead has been used operationally in Ukraine, and Bravo Ordnance 3D prints custom warheads in two weeks or less from idea to prototype.

Also on the Radar

Estes Energetics acquired Goex and is reviving black powder production in Minden, Louisiana. On the propulsion side, X-Bow and Firehawk are 3D printing motors and propellant grains, Ursa Major is selling solid rocket motors as an independent supplier, and Castelion is vertically integrating hypersonic strike weapons.

What Ties Them Together

These companies work different layers but share a thesis: energetics should be built like a modern chemical industry, with continuous processes, more than one feedstock, plants sited where supply is needed, and private capital moving at private speed. The hard parts remain. Permits still take years, qualification still runs material, component and system separately, and a plant survives on steady offtake, not a single surge. The startups that make it will solve the chemistry and the business model at the same time.

Keep reading

Call for Submissions graphic for the International Nitrocellulose & Heat Flow Calorimetry Symposium, September 21-23, 2027, Washington DC

News

Call for Submissions: The International Nitrocellulose & Heat Flow Calorimetry Symposium 2027

Session proposals and abstracts are now open for the International Nitrocellulose & Heat Flow Calorimetry Symposium, September 21-23, 2027 in Washington, DC, with submissions due January 29, 2027.

11/13/2026

People

Veterans Day: The Soldiers and Sailors Who Built American Energetics

On Veterans Day, a look at five service members whose work in the field and at the bench shaped the propellants and rockets America still relies on.

11/11/2026

US Army stamp on ground

Intel

The $4.17 Billion Queue: What the Army's Ammunition Plant Contract Is and Why It Matters

The Army just put 11 firms on a contract worth up to $4.17 billion to rebuild its government-owned ammunition plants, and how the work gets ordered matters more than the headline number.

11/10/2026

Let’s talk

Ready to rethink your energetics supplier?

Copyright © 2026 Supply Energetics All Rights Reserved.